• Skip to main content
  • Skip to primary sidebar
  • Home
  • News
  • Featured
  • More News ⌄
    • SatNews
    • SatMagazine
    • MilSatMagazine
  • Events ⌄
    • MilSat Symposium
    • SmallSat Symposium
    • Satellite Innovation
  • Contacts
  • SUBSCRIPTION

SmallSat News

You are here: Home / News / The Freeform 3D Printing Of Satellite Antennas In Space Is Developed By Mitsubishi Electric

The Freeform 3D Printing Of Satellite Antennas In Space Is Developed By Mitsubishi Electric

May 17, 2022 by editorial

On-orbit manufacturing and deployment of a satellite antenna in space (from left)

Mitsubishi Electric Corporation (TOKYO: 6503) has developed an on-orbit, additive-manufacturing technology that uses photosensitive resin and solar ultraviolet light for the 3D printing of satellite antennas in the vacuum of outer space.

The novel technology makes use of a newly developed liquid resin that was custom formulated for stability in vacuum. The resin enables structures to be fabricated in space using a low-power process that uses the sun’s ultraviolet rays for photopolymerization.

The technology specifically addresses the challenge of equipping small, inexpensive spacecraft buses with large structures, such as high-gain antenna reflectors, and enables on- orbit fabrication of structures that greatly exceed the dimensions of launch vehicle fairings. Resin-based, on-orbit manufacturing is expected to enable spacecraft structures to be made thinner and lighter than conventional designs, which must survive the stresses of launch and orbital insertion, thereby reducing both total satellite weight and launch costs.

Spacecraft antenna designs are challenging, due to their conflicting requirements for high gain, wide bandwidth and low weight. High gain and wide bandwidth necessarily require a large aperture, but economical orbital deployment conventionally dictates that designs be lightweight and small enough to fit or fold inside a launch vehicle or satellite deployment mechanism. Mitsubishi Electric’s innovative approach—resin-based on-orbit manufacturing—efficiently realizes high-gain, wide-bandwidth, large-aperture antennas deployed from a lightweight, vibration-resistant launch package. By developing a 3D printer that extrudes a custom ultraviolet-curable resin formulated for vacuum, resin-based low-power freeform (without requiring auxiliary support structures) additive-manufacturing in space has now become possible.

Features
1) 3D printer for the freeform fabrication of antennas in vacuum
— The 3D printer shares the antenna’s struts and angle-adjustment motors.
— Antenna size is not limited by the size of the fairing of the launch vehicle or the size of the satellite bus.
— On-orbit manufacturing eliminates the need for an antenna structure that can withstand vibrations and shocks during launch, which is required for conventional antenn areflectors, making it possible to reduce the weight and thickness of antenna reflectors, thereby contributing to the reduction of satellite weight and launch costs.
— Assuming the use of a 3U cubessat (100 x 100 x 300 mm) specification, an antenna reflector with a diameter of 165 mm, which is larger than the size of the cubesat bus, was fabricated in air and a gain of 23.5 dB was confirmed in the Ku-band (13.5 GHz).

Diagram (left) and photo (right) of the 3D printer.

2) World’s first** (as of May 17, 2022, according to the company’s research) photosensitive resin with stability suitable for extruding and curing in vacuum
— Commercial photosensitive resins have low molecular weight, high vapor pressure, and are not suitable for vacuum applications, where they boil and prematurely polymerize. The newly developed ultraviolet-curing resin uses a high-molecular-weight, low-vapor-pressure oligomer base blended with a vacuum stable plasticizer based on a non-volatile, polyphenyl ether to achieve a viscosity suitable for extrusion in vacuum.
— As most polymerization inhibitors require atmospheric oxygen as a co-factor to prevent premature polymerization and do not function in vacuum, the new resin formulation uses inhibitors that do not depend on the presence of oxygen and have near-zero volatility.
— When exposed to ultraviolet light, the resin polymerizes by crosslinking into a solid that is heat-resistant to at least 400°C, which is beyond the maximum temperature experienced on-orbit.
— The use of sunlight for polymerization and curing eliminates the need for a separate ultraviolet light source, enabling manufacturing with low power con
sumption.

Future Developments
Mitsubishi Electric’s resin-based, on-orbit manufacturing enables smallsats to achieve large-satellite capabilities, which reduces launch costs and allows for satellite technology to be used more than ever in applications such as communication and Earth Observation (EO). These extended capabilities are expected to enable more timely provision of satellite imagery and observation data that meet the varied needs of individuals and organizations.

Filed Under: News

Primary Sidebar

WEEKLY NEWSLETTER

Archives

  • June 2025
  • May 2025
  • April 2025
  • March 2025
  • February 2025
  • January 2025
  • December 2024
  • November 2024
  • October 2024
  • September 2024
  • August 2024
  • July 2024
  • June 2024
  • May 2024
  • April 2024
  • March 2024
  • February 2024
  • January 2024
  • December 2023
  • November 2023
  • October 2023
  • September 2023
  • August 2023
  • July 2023
  • June 2023
  • May 2023
  • April 2023
  • March 2023
  • February 2023
  • January 2023
  • December 2022
  • November 2022
  • October 2022
  • September 2022
  • August 2022
  • July 2022
  • June 2022
  • May 2022
  • April 2022
  • March 2022
  • February 2022
  • January 2022
  • December 2021
  • November 2021
  • October 2021
  • September 2021
  • August 2021
  • July 2021
  • June 2021
  • May 2021
  • April 2021
  • March 2021
  • February 2021
  • January 2021
  • December 2020
  • November 2020
  • October 2020
  • September 2020
  • August 2020
  • July 2020
  • June 2020
  • May 2020
  • April 2020
  • March 2020
  • February 2020
  • January 2020
  • December 2019
  • November 2019
  • October 2019

© 2019–2025 SatNews

x
Sign Up Now!

Enjoy a free weekly newsletter with recent headlines from the global SmallSat industry.

Invalid email address
We promise not to spam you. You can unsubscribe at any time.
Thanks for subscribing! You will now receive weekly SmallSat News updates.
We love our advertisers.
And you will too!

Please disable Ad Blocker to continue... We promise to keep it unobtrusive.
We promise not to spam you. You can unsubscribe at any time.
Invalid email address
Thanks for subscribing! Please check your email for further instructions.